• Standards: NF ISO 5749, ISO 5749, DIN ISO 5749, ASME B107.500, NF EN 60900, EN 60900, DIN EN 60900
• For your safety, all pliers are tested individually at 10,000 Volt for 10 seconds, at the end of the manufacturing cycle.
• Snipe nose for confined space (electrical cabinets, wiring).
• Cutting edges designed to cleanly cut all types of wire. 
• Soft wires and modern materials to a maximum piano wire specification of:

• 391A.14VE: 1.4mm 225 kg/mm�
• 391A.16VE: 1.6mm 220 kg/mm�
  
• High Mechanical advantage due to off-set rivet and cutting edge geometry reducing effort.
• High durability chrome-molybdenum-vanadium steel, with induction hardened cutting edges.
• Bi-Material ergonomic grips resistant to chemical agents featuring:
  • Return spring
  • Tether ready point
    (Tether point adds 10mm to nominal lenght)
• Varnish finish to help prevent rusting.

1. Sculptured upper section with fingerguard provides a natural fit aid grip
2. Wide lower section to increase contact with the plier aiding both grip and comfort
3. Return spring reduces total user effort and strain
4. Chrome plating provides maximum corrosion resistance
5. Hanging hole

Tools to EN 60900 specifications

1. Immersion test
2. Penetration test
3. Insulation adhesion test
4. Impact test
5. Non-flammability test

• Compliance with European standard EN 60900.
• For working on live components up to 1,000 volt AC.
• Each and every tool is tested to 10,000 volt for 10 seconds at the end of the manufacturing cycle.
• Our production site is accredited and certi ed to produce insulated tools..

• Prevent damage to insulation from:
• Heat (-20 to +70�C working temperature)
• Chemicals
• Cuts or perforations.
• Check insulation is sound before using a tool.
• Wear insulating gloves and eye protection.